Council Residential Districts

Overview

For more than a century, Columbus City Council operated in a fully at-large system. In 2018, Columbus voters decided to change that, opting for a hybrid at-large districting system that will create nine residential districts and expand Council from seven to nine seats.

Find Your District

This November, Columbus voters will experience this system for the first time at the polls. A hybrid at-large system means Councilmembers must live in the district they represent, but the entire city votes on each candidate, as they will still have access to every elected member. Find your district and put in your address.

Term Structure

Once elected, the City Clerk ensures that terms are staggered. At the first Council meeting in 2024, the City Clerk will divide Council districts into two classes by drawing lots. Lot A will be 5 districts and Councilmembers from those districts will serve a four year term until 2028. Lot B will be 4 districts and Councilmembers from those districts will serve a two year term until 2026. This will result in the staggering of terms for the future.

How Did We Get Here?

This historic change to the Council system was put in place by voters in 2018, and means every part of our city will receive better representation on issues affecting you and your neighbors. In 2021, the Council Residential Districting Commission was appointed and charged with creating district maps that Council would vote on and choose a final map that would be the official Columbus District Map. Find the videos of the past Commission meetings on YouTube.


Columbus District Map

View the Columbus District Map and find your district.


CRDC Community Meeting Series

In 2021, the Council Residential Districting Commission was appointed and charged with creating district maps that Council would vote on and choose a final map that would be the official Columbus District Map. Under the new Council District system, Councilmembers are required to live within the district they represent. Candidates for office must collect 250 signatures from within their district, which does not allow them to collect signatures as a slate.

Residents can find the videos of the Commission meetings on the City of Columbus' YouTube channel.


Charter Provisions

The process to create the Council Residential Districting Commission is enshrined within the Columbus City Charter.

Council Residential Districting Commission Membership
The Council Residential Districting Commission was required to be seated by March 1, 2021. The commission shall be formed as follows: “by a two-thirds vote the council shall appoint four members, and the fifth member, who shall serve as chair of the commission, shall be jointly appointed by the mayor and president of council. All members must be qualified electors of the city. Members should reflect, to the extent practicable, the diversity of the city.” No person may serve on the commission if the person is an elected official (except precinct committee members), a lobbyist registered with the City of Columbus, a candidate for elected office, or a city employee. The appointing authority may remove a member of the commission for neglect of duty, gross misconduct, failure to meet the qualification herein, or inability to discharge the duties of the commission, and such decision shall be final. All vacancies shall be filled in the same manner prescribed for the original appointment.

Map creation and timeline
The districting commission will create and submit three districting plans which lay out the boundaries of the nine council districts for the city of Columbus. By the end of 2021, Council must adopt one of the three proposed maps without making any changes to it. The commission is supposed to use the following criteria when creating the maps:

  1. The proposed maps must comply with applicable state and federal law, including the Voting Rights Act.
  2. The districts cannot vary significantly in population; the largest district by population cannot exceed the smallest by more than one percent.
  3. The districts have to be “geographically contiguous,” i.e. every district has to share at least one border with another district.
  4. The district boundaries should “encourage geographic compactness,” meaning that the districts should not attempt to connect disparate but denser population centers by using corridors of low density.
  5. To the extent practicable, district boundaries shall be drawn to maintain the geographic integrity of a neighborhood or community of interest.
  6. The commission should try to draw district boundaries using the boundaries of existing election precincts and geographically identifiable boundaries, such as roads and waterways.
  7. Districts shall not be drawn for the overt purpose of favoring or disfavoring any political group.

In 2023, the district maps will appear on the ballot for both the primary and general election.

Council Structural Changes:
Members running in 2021 will only be eligible to run for a two-year term. In 2023, all nine seats for Council will be open. At the first Council session in 2024, all of the members elected in the 2023 general election will draw lots to determine which four members initially serve a two-year term and which five members serve a four-year term in order to stagger the terms.


Frequently Asked Questions

Frequently Asked Questions about the districting process and the Council Residential Districting Commission

Go to the FAQ