DPS Change Logs

1441 – Pavement & Utility Cut and Repair Standards

• 2 – Title change to add SUP
• 7 – Note “G” Alley Repair, defined rules for chip seal, asphalt, brick, and concrete alley repair
• SHT 8 – Added Note “M” Restoration of Brick Sidewalk or Non-Standard Material
• • Added Note “N”  Shared Use Path restoration
• SHT 12 – Chg. contact information to Right of Way Permit office

1648 – Type II Crosswalk

• SHT 3 – Added street width ranges for type II markings

1700 – Tree Planting Details (NEW)

1701 – Curb Planter (NEW)

2001 – Curb, Back of Walk

• Change all % references to round to the nearest 10^th.
• Place #8 behind curb
• Remove note reference to cellular retaining wall

2301 - Brick Sidewalk

• 1 - Change all % references to round to the nearest 10^th.
• • Minor text changes
• 2 – Minor text changes
• 3 – Remove entire sheet. It references SS-1524 Roadway Pavers, not sidewalk pavers.

2310 – Shared Use Path

• 1 – Change all % references to round to the nearest 10^th.
• Add missing note to see sheet 5, note 1 for sup buildup
• Move dimension line to measure 10’ min from top of sup
• 2- Change label to 10’ min. width
• 3 – Clean up dimensioning
• • Change callout to match sup build up from 2.5” to 3” asphalt concrete
• 5 - Change all % references to round to the nearest 10^th.
• • Remove >5% references to pavement and gutter
  • Remove distances shown from face of curb distance for sidewalk and sup widths
  • Continue 7.7% dimension for ramp and detectable warning
  • Added note to continue material buildup 5’ past both sides of drives

2319- Curb Ramps

• Change all % references to round to the nearest 10^th.
• 2 – Rewording of note #6
• 3 – Note #7 was reworded for gutters and streets change of grade not to exceed 13.3%
• • Remove >5% references to pavement and gutter
  • Detectable warning notes numbers 13-17 were added due to the removal of the information from sheet #22
• 22 – Curb ramp detectable warning information completely removed. Notes added to sheet #7
• • 23 moved to sheet 22
• 23 and sheet 24 moved up to 22 and 23 respectively.

2328- Concrete Stairs

• 1 – Show top step at 15”
• • Show handrail extended past bottom step
  • Added note for handrail installation
  • Change all % references to round to the nearest 10^th.
  • Change bottom step to minimum 12” width
  • Clean up minor cad mistakes
  • Title sheet to Rise over 24”
• 2 – Show top step at a minimum 15” width with added note
• • Change all % references to round to the nearest 10^th.
  • Add note for bottom step for sloping public way serving as a landing and permitting the riser to be reduced
  • Label sheet as “Rise of 24” or Below”
• 3 – Show connecting to existing step
• • Change all % references to round to the nearest 10^th.
  • Label sheet to “Connection to Existing Step(s)”

4 – Add note for Historic preservation contact